Ribbon label tutorial

I needed a cheaper alternative to having my product labels custom made in the form of woven labels. It just seemed that I was going through them at a rapid pace of knots, and working out at approx $34 for 50 labels, it was just not in my budget. I also wanted a graphic on my label and that would cost even more!

So ingenuity came to the fore and I realised I can make my own labels for less than $20. So here is the Silly Gilly tutorial on making your own custom ribbon labels.....

Materials required:
A4 plain paper
Iron-on T-Shirt Transfer paper
Ribbon (I use white 15mm wide double faced Satin ribbon)
Iron and ironing board
Scissors
Printer (I use an ink jet printer)
Computer with graphics program

Step 1:
Decide on the image you want on your label. Get handy with your computer and, using an image manipulation program (I use Photoshop) create a whole page full of your logo. I adapted my Silly Gilly store logo. I have created it so that it will be a horizontal label which is folded in half.

Step 2:
Repeat it in rows to fit across the page and space them so that each row has a small amount of space around it to enable easy cutting out. Make sure your images are printed on the page reverse. This enables the image to come out the right way on the label. Do a trial run with a plain piece of paper to ensure it fits and that the images are spaced correctly.

Step 3:
Load your printer with your chosen T-Shirt Transfer paper and print your images. I print my images with the printer set on 'Standard' print and on plain paper. You may have a setting for your printer for Transfer paper.

Cut out each image individually, ensuring the height of each image will fit onto the ribbon you will be using.


Step 4:
Following the instructions particular to your T-Shirt Transfer paper, lay the cut out printed images on the ribbon and iron. I allow a small amount of ribbon between each image so that there is a seam allowance when you come to attach the label.

Step 5:
Cut out each individual label and it's ready to use on your next project!!

My pack of T-Shirt Transfer paper contained 5 x A4 sheets and I can fit approx 270 labels on those 5 sheets. Which makes the labels a lot more cost effective than buying custom made woven labels.

My example above is shown with a fold in the center as I use these on side seams as shown in the following pictures:
Hopefully this tutorial will help you if you want to save a little bit of money and have an entirely unique option for labeling your wares. Please feel free to ask any questions as this is my first attempt at writing a tutorial! Good luck and I'd love to see some examples of your efforts.